Building Code Quick Reference
Riverside County · Riverside Municipal Code (RMC)
Everything you need to know about building in Riverside, California — setback distances, height limits, lot coverage, FAR, parking requirements, and the issues that Riverside plan checkers flag most often. Use this as a quick reference before designing or submitting plans.
Values shown for the most common residential zone. See full zone table below for all zones.
Each zone in Riverside has different development standards. The table below shows setbacks (the minimum distance your building must be from each property line), maximum height, number of stories, lot coverage percentage, and Floor Area Ratio (FAR) for each residential zone.
| Zone | Front | Side | Rear | Height | Stories | Coverage | FAR |
|---|---|---|---|---|---|---|---|
| R-1-7000 — Single-Family Residential | 25' | 5' | 15' | 30' | 2 | 40% | — |
| 25' front setback. Garage setback: 20' from property line. | |||||||
Parking is one of the most common plan check flags. Riverside requires the following parking ratios for residential projects — make sure your site plan accounts for these before submitting.
Covered/enclosed required
Waived near transit
Standard residential
2 covered spaces per SFR. ADU: 1 unless transit-adjacent.
→ Use our Parking Calculator to calculate your exact requirement.
Beyond zoning, Riverside has general building requirements that apply to all residential construction. These are commonly referenced during plan check.
These are the issues that Riverside plan reviewers flag most frequently on residential submissions. Addressing these before you submit can save one or more correction cycles (each adding 2–4 weeks to your timeline).
Check Riverside's planning department website for their zoning map, or search your address on our parcel search tool. Your zone code (R1, R2, etc.) determines which row in the table above applies to your property. You can also call Riverside's planning counter for a quick zoning verification.
Initial plan review in Riverside typically takes 4–8 weeks. If corrections are required (which is common), each resubmission adds another 2–4 weeks. Running a pre-submission plan check can eliminate the most common correction items and save one or more review cycles.
Yes. Under California state law, Riverside must approve ADUs that meet state standards — no discretionary review required. Detached ADUs can be up to 1,200 sqft with only 4' rear and side setbacks. Use our Riverside ADU Eligibility Checker to see what you can build on your lot.
The top reasons are setback violations (measuring from the wrong reference point), height calculation errors (using the wrong grade measurement method), lot coverage exceeding the zone limit, insufficient parking, and missing energy code (Title 24) compliance. See the "Common Plan Check Flags" section above for Riverside-specific issues.
The zoning standards above apply to standard residential projects. Specific overlays (historic districts, hillside areas, coastal zones) may have additional restrictions. Commercial and mixed-use zones have different standards. Always verify your specific zone and any applicable overlays with Riverside's planning department.
Enter your project dimensions and we'll compare them against Riverside's building codes. Catch setback violations, height issues, and parking shortfalls before they become correction letters.
Start Riverside Plan Check →